Sintered Stone Manufacturers & Brands A–Z: Global Directory

An illustrated A–Z guide to 56 global sintered stone and porcelain brands, with collection-specific examples, manufacturer and regional supplier references and Funtek’s practical observations on cutting, edges, bookmatch and inspection.
LuCharlotte LuCharlotte 28 min read Updated

Sintered stone manufacturers and slab brands include Neolith, Lapitec, Dekton by Cosentino, Laminam, Atlas Plan, SapienStone, Techlam and Funtek. This illustrated A–Z directory covers 56 brands and product programmes, with their origins, relevant surface ranges, representative specifications and manufacturer and identified regional supplier references.

The useful differences are the material family, the selected collection’s size and thickness, its finish and what appears at the cut edge. Some names belong to the same group; some identify a thin covering programme or a supply brand. The entries below make those distinctions explicit so you can build a shortlist for your actual surface.

Updated 13 October 2026. Alphabetical order is for finding names, not a quality ranking. This is a selected global directory, not a census of every factory. It includes dedicated slab brands, architectural porcelain brands and clearly identified related covering or supply businesses. Country refers to brand origin or the stated supply base, not the manufacturing location of every product. Specifications are representative examples; a range listing does not mean every colour is available in every size, finish or thickness. Logos identify the named brands or their clearly labelled parent businesses.

How representative slab formats differ

These examples show why “large slab” and “12 mm” are not enough to compare products. Dimensions below are manufacturer-listed sheet formats, not finished component dimensions.

On a phone, swipe the table sideways. The brand column stays visible.

Brand / range Representative format and thickness Useful distinction
Arklam brand logoArklam 1600 × 3200 mm · 12 / 20 mm kitchen range Thinner 3 / 6 mm coverings are a separate selection.
Atlas Plan brand logoAtlas Plan 1620 × 3240 mm unrectified; 1600 × 3200 mm rectified Edge trimming changes the usable format.
Caesarstone brand logoCaesarstone 3200 × 1600 mm · 12 mm porcelain; some 20 mm Quartz and mineral specifications describe different materials.
Coverlam by Grespania brand logoCoverlam by Grespania Basic Blanco · 1620 × 3240 mm · 12 / 20 mm Natural The Polished finish is listed at 12 mm.
Dekton by Cosentino brand logoDekton by Cosentino 3200 × 1440 mm standard; 3300 × 1630 mm Jumbo The selected colour and market determine available options.
Florim Stone brand logoFlorim Stone 2024 manual · 3200 × 1600 mm nominal; reinforced 12* = 12.7 mm Reinforcement affects actual thickness.
Funtek brand logoFuntek 1600 × 3200 mm · listed 6 / 9 / 12 / 15 mm Compare full-slab supply with drawing-based fabricated components.
Kale logo for the Kalesinterflex porcelain slab programmeKalesinterflex by Kale Bronze Line Matt · 1620 × 3230 mm · 12 mm A specific product code establishes the quoted configuration.
Laminam brand logoLaminam 1620 × 3240 mm is one listed format; 12+ = 12.5 mm “+” identifies a reinforced configuration; full size is unrectified.
Lapitec brand logoLapitec 3365 × 1500 mm · 12 / 20 / 30 mm Full-body material; different sheet shape and thick-slab options.
Marazzi brand logoMarazzi The Top · 1620 × 3240 mm · 12 / 20 mm Its 6 mm offering uses a different listed format.
Neolith brand logoNeolith TAKAO Japan example · 3200 × 1600 mm · 12 / 20 mm Regional trimmed format; other markets and thin sheets have different options.

Where to start for your application

Start with the product family that fits the job, then compare the exact design, finish and available supply. The following routes are starting points, without a best-to-worst order.

  • Kitchen tops and islands: countertop-oriented ranges such as Atlas Plan, Marazzi The Top, Coverlam Top and SapienStone make furnishing-slab specifications easier to locate. Include the finished dimensions and support layout in your comparison.
  • Thin large wall and floor surfaces: compare programmes such as Kerlite, Slimtech, ZERO.3 and Coem gres WIDE. Their low-thickness formats belong with a suitable substrate and installation system.
  • Visible edges and grooves: begin with Lapitec or the specifically identified body technologies in Atlas Plan, SapienStone and FLORIM stone. Compare a cut edge as well as the face; body colour and through-body veins answer different design questions.
  • Matching slabs with conventional tiles: Marazzi, Imola and Supergres provide useful collection-level examples. The matching look can have different dimensions and thicknesses across the slab and tile references.
  • Fabricated components supplied for a project: review Funtek’s slab and drawing-based fabrication offer. The useful next step is a selected surface plus a finished-piece drawing, leading to a sample and fabrication quotation.

A

ABKSTONE brand logo

ABKSTONE

Italy

ABK Group · porcelain slabs for countertops and furniture

The current ABKSTONE catalogue starts with 163.5 × 323 cm slabs. Marble, stone and concrete effects are presented as a dedicated furnishing-surface range.

The extra nominal width is useful when laying out an island and its returns; the slab perimeter still needs to be included in the cutting allowance. ABKSTONE and Flaviker have separate catalogues despite sharing a group.

ABKSTONE: product / catalogue reference ↗
Ariostea official logo

Ariostea

Italy

Ultra · large porcelain slabs

Ultra Crystal is presented in a 300 × 150 cm format with a native 6 mm thickness. Ultra is the relevant slab programme within Ariostea’s wider porcelain range.

This is a useful starting point for large marble-look wall surfaces. A 6 mm covering slab and a countertop-specific slab belong in different shortlists.

Ariostea: product / catalogue reference ↗
Arklam brand logo

Arklam

Spain

Large sintered surfaces · kitchen and architectural ranges

Arklam separates 1600 × 3200 mm kitchen slabs in 12 and 20 mm from its thinner 3 and 6 mm architectural coverings.

That division makes coordinated wall and worktop schemes easier to research without treating the thin wall panel as the worktop specification.

Arklam: product / catalogue reference ↗
ASCALE brand logo

ASCALE

Spain

Large-format sintered stone

ASCALE lists 162 × 324 cm slabs in 12 and 20 mm, and 160 × 320 cm slabs in 6 mm. Its designs include marble, stone, cement and wood effects.

The format changes with thickness: a layout drawn for the larger worktop sheet should not automatically be reused for the 6 mm covering sheet.

ASCALE: product / catalogue reference ↗
Atlas Concorde brand logo

Atlas Concorde

Italy

Porcelain floor and wall collections · related Atlas Plan slabs

Atlas Concorde’s portfolio centres on coordinated floor and wall collections. Atlas Plan is its dedicated brand for large slabs used in furnishings and architectural surfaces.

Use Atlas Concorde for the surrounding tile scheme and Atlas Plan for the slab specification. Counting the two names as two unrelated factories would misrepresent their relationship.

Atlas Concorde: product / catalogue reference ↗
Atlas Plan brand logo

Atlas Plan

Italy

Atlas Concorde · large porcelain slabs

The format menu distinguishes 162 × 324 cm unrectified slabs from 160 × 320 cm rectified slabs. Selected ranges use NaturaVein Tech through-body veining or NaturaBody Tech full-body technology.

This is a meaningful comparison for a waterfall edge: through-body vein technology, body colour and a surface print describe different appearances at the cut edge. These technologies are collection-specific.

Atlas Plan: product / catalogue reference ↗
Azulev brand logo

Azulev

Spain

Slimrect · thin porcelain and ceramic coverings

Azulev’s Slimrect page distinguishes 7 mm porcelain from 6 mm white-body ceramic coverings. The brand also belongs to the wider Rocersa Group ceramics portfolio.

This is a related covering brand rather than a like-for-like countertop slab choice. Even under one programme name, porcelain and white-body ceramic should remain separate material categories.

Azulev: product / catalogue reference ↗

C

Caesar Ceramics brand logo

Caesar Ceramics

Italy

Porcelain stoneware · Slab2 and furnishing slabs

Slab2 includes 120 × 278 cm coverings; the official page also points to a separate 12 mm furnishing-slab range for kitchen tops, tables and furniture.

Start with the application-specific range when matching a floor or wall effect to a countertop. Caesar Ceramics is a different company from Caesarstone.

Caesar Ceramics: product / catalogue reference ↗
Caesarstone brand logo

Caesarstone

Israel

Porcelain surfaces · separate from quartz, mineral and fusion surfaces

The UK specification page lists porcelain at 3200 × 1600 mm and 12 mm, with selected designs also in 20 mm. Porcelain finishes include Honed, Ultra Rough, Stone and Silk, depending on the model.

The same brand also sells other material families. Its quartz or mineral slab sizes and thicknesses should not be copied into a porcelain comparison.

Caesarstone: product / catalogue reference ↗
Casalgrande Padana brand logo

Casalgrande Padana

Italy

Porcelain stoneware · Kontinua

Kontinua identifies the manufacturer’s large-surface programme. The current product selector separates 6 mm slabs from standard 8–10 mm tiles and thicker outdoor products.

Its architectural catalogue is relevant when the project includes façades as well as interiors. Select the slab collection and fixing system together; a brand-wide floor rating is not a façade approval.

Casalgrande Padana: product / catalogue reference ↗
CRL Stone logo for the Ceralsio ceramic surface range

Ceralsio by CRL Stone

United Kingdom · CRL supply brand

CRL Stone · ceramic worktop brand

Soft White Natural is listed at 3200 × 1600 mm in 6 mm and 3240 × 1620 mm in 12 and 20 mm. The 2026 product guide separately identifies natural and polished designs and bookmatched options.

Ceralsio is a brand offered through CRL Stone, not evidence of a separate factory owned by that name. It is useful for buyers researching a UK supply route for ceramic worktops.

Shown: CRL Stone company mark for its Ceralsio range.

Ceralsio by CRL Stone: product / catalogue reference ↗
Cerdomus official logo

Cerdomus

Italy

Porcelain stoneware · Maxima large slabs

Croatia Avorio provides a concrete example: 120 × 280 cm, 6 mm, rectified, matt porcelain. Its smaller tiles have different thickness and finish combinations.

The limestone-inspired collection allows a slab wall to be coordinated with conventional floor formats without assuming every finish exists in the largest size.

Cerdomus: product / catalogue reference ↗
Coem brand logo

Coem

Italy

Porcelain stoneware · gres WIDE

Coem’s large-slab selector lists 120 × 280, 120 × 260 and 120 × 240 cm formats in 6 mm. Its separate outdoor range is identified as 2 cm.

The three heights offer different joint layouts for stone-look walls. The 20 mm outdoor tile range should not be mistaken for a 20 mm worktop slab.

Coem: product / catalogue reference ↗
Coverlam by Grespania brand logo

Coverlam by Grespania

Spain

Large-format porcelain / sintered coverings · Coverlam Top worktops

Grespania separates architectural Coverlam from furnishing-oriented Coverlam Top. In Basic Blanco, the Top page lists 1620 × 3240 mm in 12 and 20 mm Natural, while Polished is listed in 12 mm.

The same Basic name also appears in thin coverings with different dimensions. For a matching wall and worktop, choose the relevant Coverlam or Coverlam Top product code; the finish and thickness options are specific to that reference.

Coverlam by Grespania: product / catalogue reference ↗

D

Dekton by Cosentino brand logo

Dekton by Cosentino

Spain

Cosentino · ultracompact surfaces

Cosentino distinguishes the standard 3200 × 1440 mm format from a 3300 × 1630 mm Jumbo format on its flooring page. The broader range includes several thicknesses and application-specific formats.

Jumbo availability is a design and supply question tied to the selected colour and market. Dekton is a different surface family from Cosentino’s Silestone.

Dekton by Cosentino: product / catalogue reference ↗
Delfone brand logo

Delfone

China

Sintered stone · separate slab and furniture websites

The slab site lists Apuan Carved White in 1600 × 3200 × 12 mm within its classic marble-look series. The main Delfone site also presents finished furniture.

A table offered under the brand and a full slab have different purchase scopes. The slab site is the more useful source for surface specifications.

Delfone: product / catalogue reference ↗
Durstone brand logo

Durstone

Spain

DURSLAB · thin large-format porcelain

DURSLAB specifies 120 × 280 cm at 6 mm and 120 × 120 cm at 9 mm. Examples include Luxury Breccia, Ocean Jade and Silver Lake.

This is a coordinated wall-and-floor offering with two thicknesses, not one uniform slab specification. The taller sheet serves a different layout from the square floor format.

Durstone: product / catalogue reference ↗

E

Emil Ceramica brand logo

Emil Ceramica

Italy

Emilgroup · porcelain floor and wall slabs

Emilgroup’s large-slab page highlights 120 × 278 cm porcelain for floors and wall coverings. The group also presents other brands and formats through its product selector.

For a coordinated room, the chosen collection is the useful comparison unit. Emilceramica, Ergon, Provenza and Emilgroup should not be treated as four unrelated slab factories.

Emil Ceramica: product / catalogue reference ↗

F

Fiandre official logo

Fiandre

Italy

Iris Ceramica Group · Maximum porcelain slabs

Pietra Grey in the official German catalogue includes 300 × 150 cm at 6 mm and 320 × 160 cm at 12 mm, alongside smaller formats.

This provides a collection-level comparison between a thinner architectural covering and a thicker furnishing surface. Maximum is a product programme within Fiandre, not another independent manufacturer.

Fiandre: product / catalogue reference ↗
Flaviker brand logo

Flaviker

Italy

ABK Group · Supreme Evo porcelain

Supreme Evo lists 160 × 320 and 120 × 280 cm formats within a range carrying 6 and 8.5 mm products. Finish names include Lux, Soft, Naturale and Antique 3D.

The range offers both polished and textured visual treatments. The collection’s full-body porcelain classification does not, by itself, mean its printed marble veins run through the entire slab.

Flaviker: product / catalogue reference ↗
Florim Stone brand logo

Florim Stone

Italy

Florim · porcelain furnishing surfaces

Florim’s September 2024 technical manual lists a nominal 320 × 160 cm format, with 6, reinforced 6*, reinforced 12* and 20 mm versions. The stated actual thicknesses including reinforcement are 6.7 mm for 6* and 12.7 mm for 12*.

The reinforcement mark changes the thickness being compared, just as Laminam’s “+” has a specific meaning. Florim’s newer catalogue also distinguishes printed and full-body surfaces. The selected range’s current technical sheet establishes its construction.

Florim Stone: product / catalogue reference ↗
FMG brand logo

FMG

Italy

Iris Ceramica Group · MAXFINE and Full Body³

FMG’s official site separates MAXFINE large slabs, Full Body³ collections and the Design Your Slab customisation service. FMG stands for Fabbrica Marmi e Graniti.

These programme names identify different design routes within one brand. Full Body³ deserves its own edge sample comparison rather than being grouped with every printed MAXFINE design.

FMG: product / catalogue reference ↗
Funtek brand logo

Funtek

China

Sintered stone slabs · cut-to-size and project supply

Funtek’s factory page lists 1600 × 3200 mm slabs in 6, 9, 12 and 15 mm, as well as other formats. Its services include drawing review, cut-to-size pieces, openings and edge or mitre details.

The useful comparison is the complete supply scope: full slabs or fabricated pieces, approved face direction, support and cutouts, packing and destination. Funtek’s published manuals explain these decisions in detail.

Funtek: product / catalogue reference ↗

G

Gardenia Orchidea brand logo

Gardenia Orchidea

Italy

ABK Group · Gardenia & Ariana

The current ABK Group site uses Gardenia & Ariana branding. Gardenia Orchidea remains a useful name for readers tracing older catalogues and product references.

Brand naming can change while older project specifications remain in circulation. Use the current catalogue’s collection name and product code when replacing or extending an existing installation.

Gardenia Orchidea: product / catalogue reference ↗

I

Imola Ceramica brand logo

Imola Ceramica

Italy

Cooperativa Ceramica d’Imola · porcelain collections

Azuma Up Hazelnut A.UP6 278NO RM is listed at 120 × 278 cm and 6.5 mm. The matching 120 × 120 cm Hazelnut tile is listed at 10 mm. Azuma Up is a warm-toned concrete-look collection within Imola’s porcelain range.

The matching look can link a tall wall panel with a square floor tile, but the thickness and product code change. Imola, LaFaenza and Leonardo sit within Cooperativa Ceramica d’Imola and retain separate collections.

Imola Ceramica: product / catalogue reference ↗
Inalco brand logo

Inalco

Spain

MDi surfaces · Digital Texture and specialist ranges

Ayla lists 1600 × 3200 mm among its formats. The same page limits the DT Grip+ finish to 1600 × 1600 mm. Inalco separately presents MDi Induction and Tailor Made.

A finish restriction can change the layout even when the design name stays the same. Invisible-induction surfaces are a specialist system, not a feature of every MDi slab.

Inalco: product / catalogue reference ↗
Infinity Surfaces brand logo

Infinity Surfaces

Italy

Large porcelain slabs · architectural and furnishing surfaces

Infinity’s official site describes a 160 × 320 cm format with 6, 12 and 20 mm thickness options. Its selector separates finishes including Levigato, Satin and Matt.

The same visual direction can support covering and furnishing applications, but the available thickness-and-finish combination still belongs to the selected collection.

Infinity Surfaces: product / catalogue reference ↗
Iris Ceramica brand logo

Iris Ceramica

Italy

Iris Ceramica Group · Panels and large-format collections

Iris Ceramica identifies Panels in its large-format collection menu and supplies laying information separately. Its catalogue also contains conventional wall ceramics and porcelain floor surfaces.

The brand and the wider Iris Ceramica Group are different levels of the organisation. A technical document for SapienStone or FMG should not be treated as the specification for an Iris Ceramica Panels product.

Iris Ceramica: product / catalogue reference ↗
Italgraniti Group brand logo

Italgraniti Group

Italy

Porcelain slabs · Mega and Supreme

Mega reaches 160 × 320 cm at 6 mm. Supreme is presented in 6 and 12 mm, with selected marble effects offering continuous veining or open-book compositions.

The group’s newer full-body Supreme developments make edge appearance a separate selection decision. A Mega covering and a Supreme furnishing surface should be compared at collection level.

Italgraniti Group: product / catalogue reference ↗

K

Kale logo for the Kalesinterflex porcelain slab programme

Kalesinterflex by Kale

Türkiye

Kale · porcelain slab programme

Bronze Line Matt is listed at 162 × 323 cm and 12 mm on Kale’s product page. Its product options also distinguish a 160 × 320 cm format and 6 mm thickness.

Türkiye adds a manufacturing region often missed by Europe-and-China-only lists. The product code, format and thickness identify the actual option; Kalesinterflex is the programme name within Kale.

Shown: Kale company mark for its Kalesinterflex programme.

Kalesinterflex by Kale: product / catalogue reference ↗
Kerlite by Cotto d’Este official logo

Kerlite by Cotto d’Este

Italy

Panariagroup · reinforced laminated porcelain

Kerlite’s current technology page lists formats up to 100 × 300 and 120 × 278 cm. The Plus families include 3.5, 5.5 and 6.5 mm products with fibreglass reinforcement.

Kerlite Easy is a specific dry-laying system for designated Plus products. Thin reinforced floor and wall slabs should not be mistaken for solid worktop blanks.

Kerlite by Cotto d’Este: product / catalogue reference ↗

L

Laminam brand logo

Laminam

Italy

Large-format ceramic surfaces · thickness families

Laminam lists 1620 × 3240 mm among its formats. Its 12+ and 20+ labels correspond to nominal thicknesses of 12.5 and 20.5 mm; “+” denotes a fibreglass-backed configuration.

“Full size” means the slab is supplied unrectified as it exits the kiln. Both the thickness label and usable trimmed size deserve attention when comparing nominally similar quotations.

Laminam: product / catalogue reference ↗
Lapitec brand logo

Lapitec

Italy

Full-body sintered stone

Lapitec’s interior catalogue specifies 3365 × 1500 mm sheets in calibrated 12, 20 and 30 mm thicknesses. Its material is presented as full-body sintered stone.

The 30 mm option and the narrower, longer sheet create a different fabrication layout from a 3200 × 1600 mm porcelain slab. Its body and texture deserve inspection on a cut sample.

Lapitec: product / catalogue reference ↗
Lea Ceramiche brand logo

Lea Ceramiche

Italy

Panariagroup · Slimtech laminated porcelain

Slimtech’s current technology page lists formats up to 100 × 300 and 120 × 278 cm. Lea also offers the Slimtech Easy installation system and a separate 20 mm L2 range.

A renovation floor, wall skin and outdoor paver require different product and installation choices. The 20 mm range is not the thickness of every Slimtech slab.

Lea Ceramiche: product / catalogue reference ↗

M

Marazzi brand logo

Marazzi

Italy

Porcelain slabs · Grande coverings and The Top furnishings

Grande includes 6 mm slabs. The Top separates 160 × 320 cm at 6 mm from 162 × 324 cm in 12 and 20 mm; selected designs use 3D Ink.

This makes Marazzi useful for researching continuity between a room’s coverings and its fabricated surfaces. The Top is the more direct route for countertop-specific products.

Marazzi: product / catalogue reference ↗
Marca Corona brand logo

Marca Corona

Italy

Porcelain stoneware · large architectural slabs

Marca Corona distinguishes 120 × 278 cm at 6 mm from 120 × 120 cm at 9 mm. Its large-format selection includes stone effects and wallpaper-like botanical and decorative designs.

The taller decorative panel is a distinct design option for a feature wall. Coordinated square floor tiles do not have the same thickness as the wall-height sheet.

Marca Corona: product / catalogue reference ↗
Marco Polo Slab brand logo

Marco Polo Slab

China

Marco Polo · sintered stone slab programme

The Morandi catalogue is explicitly identified as a 900 × 2600 mm slab series on Marco Polo Slab’s official site. The wider brand also offers many conventional tile products.

This narrower format can suit a different panel layout from the common 1600 × 3200 mm furnishing sheet. Use the slab programme’s own references when specifying large surfaces.

Marco Polo Slab: product / catalogue reference ↗
MFG Sintered Stone brand logo

MFG Sintered Stone

China

China-based sintered stone manufacturer and supplier · company website description

MFG describes itself as a Foshan-based manufacturer and supplier. Its product navigation lists 1600 × 3200, 1200 × 2700, 1200 × 2600, 1200 × 2400 and 800 × 2600 mm slabs for surfaces including worktops, walls and furniture.

The different sheet widths and lengths provide several routes for a component or wall layout. A manufacturer or supply-business entry should be compared through the specific product and quoted supply scope, using the same approach as the other names in this directory.

MFG Sintered Stone: product / catalogue reference ↗
Mirage official logo

Mirage

Italy

Porcelain stoneware · large slabs and furnishing solutions

Mirage’s current furnishing page distinguishes the Evo Living Soul table, with a recessed porcelain top, from Eden, with a surface-mounted top. Stone, concrete and wood effects extend the architectural palette into furniture.

Mirage is relevant when coordinating architectural porcelain with finished furniture. A supplied table and a slab for independent fabrication remain different products. Its broader catalogue also includes floor, wall and outdoor systems.

Mirage: product / catalogue reference ↗
Monalisa brand logo

Monalisa

China

Porcelain panels and ceramic tiles

Monalisa’s slab catalogue separates formats including 1200 × 2700 and 900 × 2700 mm. Its broader product menu also lists conventional tiles.

The slab filter is the useful starting point for tall wall panels. A bathroom wall product or a smaller tile in the same brand should not automatically be treated as a countertop blank.

Monalisa: product / catalogue reference ↗

N

Nabel brand logo

Nabel

China

Sintered stone and porcelain slabs · distinct from quartz

Nabel’s 2026 handbook identifies TANG 20 at 1600 × 3200 mm and 20 mm. Its export site separately lists full-body marble-look slabs and quartz products.

The handbook provides a current slab-specific reference. Keep the quartz family outside the sintered-stone comparison and assess edge appearance on the selected full-body design.

Nabel: product / catalogue reference ↗
Naxos brand logo

Naxos

Italy

Fincibec Group · Large Sizes porcelain

Naxos’s Large Sizes catalogue includes 120 × 278 cm sheets, with examples such as Victoria in a brushed finish and Caravaggio Gold in a polished finish.

The choice extends beyond a neutral stone effect to decorative large panels. Naxos, Century and Monocibec belong to the same group but retain separate collections.

Naxos: product / catalogue reference ↗
Neolith brand logo

Neolith

Spain

Sintered stone · kitchens, bathrooms, cladding and furniture

Neolith covers kitchens, bathrooms, cladding and furniture. As a regional format example, its Japanese distributor TAKAO lists 3200 × 1600 mm at 12 / 20 mm and 3600 × 1200 mm at 3 / 6 mm, with other formats for thinner surfaces.

These regional dimensions are trimmed format references; TAKAO notes that supplied sheets can be slightly larger. The wider kitchen sheet and narrower, longer covering sheet create different cutting layouts. Regional ranges and stock should be compared using the exact model and finish.

Neolith: TAKAO regional format reference ↗

P

Pamesa Ceramica brand logo

Pamesa Ceramica

Spain

Pamesa Group · XXL porcelain

Pamesa’s downloadable XXL catalogue includes 120 × 280 cm sheets. Cellini Blanco is shown in a polished marble effect; Constanza Desert offers a different stone-look direction.

The catalogue separates large sheets from coordinated square formats. Pamesa’s extensive general tile portfolio is broader than this slab selection.

Pamesa Ceramica: product / catalogue reference ↗
Panaria Ceramica brand logo

Panaria Ceramica

Italy

Panariagroup · ZERO.3 laminated porcelain

ZERO.3 lists 100 × 300, 120 × 260 and 120 × 278 cm slabs with 3.5, 5.5 or 6 mm products across its range.

The low thickness is useful for supported coverings and suitable renovation systems. These slabs should be compared with other laminated coverings rather than automatically with 12 or 20 mm kitchen-top blanks.

Panaria Ceramica: product / catalogue reference ↗

R

Ragno brand logo

Ragno

Italy

Porcelain stoneware · large-format architectural collections

Incanto includes Onice Perla Glossy at 120 × 278 cm and 6 mm. Stratford also offers 120 × 278 cm matt cement-look slabs alongside smaller coordinated tiles.

This is a useful comparison between an expressive onyx-look wall and a quieter cement-look scheme. The largest slab and its matching floor format can have different thicknesses.

Ragno: product / catalogue reference ↗
Refin brand logo

Refin

Italy

Gruppo Concorde · architectural porcelain

Refin’s current large-format selection includes 120 × 278 cm sheets alongside 120 × 120 cm and other tile formats. Its porcelain catalogue is focused on architectural surface effects.

For a continuous room scheme, the tall sheet and matching floor format can be researched together. Refin and Atlas Concorde share group connections but have different brand collections.

Refin: product / catalogue reference ↗

S

SapienStone brand logo

SapienStone

Italy

Iris Ceramica Group · porcelain countertops and 4D Ceramics

SapienStone presents 12 and 20 mm countertop surfaces and a distinct 4D Ceramics offering that carries design into the slab body.

This is one of the relevant routes for an exposed-edge comparison. Specify the actual 4D collection if body veining is important; it should not be assumed from a SapienStone logo alone.

SapienStone: product / catalogue reference ↗
Shunhui Tech brand logo

Shunhui Tech

China

Shuncheng Group · dedicated sintered stone brand

Shunhui Tech is the group’s dedicated sintered stone identity, separate from the broader Shunhui ceramic tile business. Its own site is the relevant brand reference for slab collections.

For buyers encountering Chinese and English brand names, retaining the exact Shunhui Tech identity helps avoid substituting a conventional tile product for the requested slab.

Shunhui Tech: product / catalogue reference ↗
SINISO brand logo

SINISO

China

Sintered stone · slab formats and digital surfaces

SINISO’s product selector distinguishes 1600 × 3200 × 12 mm, 1200 × 2700 × 6 mm and 800 × 2600 × 15 mm. It separately identifies a 3D Digital category.

These are different product configurations, not interchangeable thickness options on one sheet size. Select the configuration that fits the component or wall layout before comparing a design image.

SINISO: product / catalogue reference ↗
Stonepeak Ceramics brand logo

Stonepeak Ceramics

United States

Iris Ceramica Group · US porcelain and Plane panels

Stonepeak’s current site separates 6 mm XL slabs, 12 mm large-format slabs and other product families. It also distinguishes US-made collections from Italian-made furnishing products.

Country of brand origin is not proof of where every collection is manufactured. The Plane programme and newer full-body surfaces need their own product documents.

Stonepeak Ceramics: product / catalogue reference ↗
Supergres brand logo

Supergres

Italy

Porcelain stoneware · Design Slabs

Design Slabs are specified at 120 × 278 cm and 6 mm, with matching 120 × 120 cm tiles at 9 mm.

This pairing is useful for coordinating a large wall surface with a more conventional floor format. The matching graphic does not mean the products have identical thickness or installation requirements.

Supergres: product / catalogue reference ↗

T

TAU Ceramica brand logo

TAU Ceramica

Spain

Ceramic and porcelain surfaces · Big Sizes

TAU’s current Big Sizes product filter includes 120 × 280 cm surfaces. Its catalogue also separates smaller formats and specialised surface ranges.

Use the TAU collection reference for a tile-and-slab scheme, and ASCALE’s own catalogue for ASCALE products. Historical association between names is not a reason to merge their current product specifications.

TAU Ceramica: product / catalogue reference ↗
Techlam by Levantina official logo

Techlam by Levantina

Spain

Levantina · large sintered / porcelain surfaces

Levantina lists Techlam thicknesses of 3, 5, 6, 12 and 20 mm. Its 2024 general catalogue separates 3000 × 1000 mm thin sheets from 3200 × 1600 mm sheets in 6, 12 and 20 mm.

The distinction provides a useful covering-versus-furnishing comparison. Levantina also supplies natural stone, which should remain a separate material family.

Techlam by Levantina: product / catalogue reference ↗

V

Versace Ceramics brand logo

Versace Ceramics

Italy

Designer ceramics · collections presented through ABK Group

The current Versace Ceramics site presents named collections including Harmony, V-Stone, Leatherwood and Tarsia. It is a designer surface brand with its own decorative identity.

The fashion name describes a design offering rather than a separate slab material technology. The selected collection establishes which format and application is appropriate.

Versace Ceramics: product / catalogue reference ↗

X

XTONE brand logo

XTONE

Spain

PORCELANOSA Group · porcelain surfaces

XTONE’s current site separates its porcelain XTONE range from Altissima natural stone. It offers architectural surfaces and furnishing applications through these distinct material routes.

Select the porcelain family for this comparison. A natural stone design listed on the same site should not be labelled sintered stone merely because it appears within the XTONE portfolio.

XTONE: product / catalogue reference ↗

How this directory was compiled: entries use named manufacturer collection pages, technical manuals and clearly identified regional supplier information. Sizes, reinforcement marks and finish combinations refer to the stated examples; a dated manual remains a dated example. Legacy names are retained where they help identify older specifications. Funtek publishes this directory and supplies its own slabs and fabricated components. The practical observations below describe Funtek’s published guidance and an illustrative layout calculation; the brand comparison is based on product documentation.

Funtek’s observations: what changes the finished result

A brand shortlist becomes useful when it resolves a design or fabrication decision. The following observations come from Funtek’s published product, fabrication, face-planning and inspection guidance.

1. Slab area does not tell you whether the pieces fit

Consider a 3200 × 1600 mm sheet, a 2800 × 900 mm island top and a 900 × 900 mm waterfall panel. The pieces total 3.33 m², less than the sheet’s 5.12 m², but they cannot both be cut as intact rectangles aligned to the sheet edges. Beside the top, only 700 mm of width remains; beyond its end, only 400 mm of length remains. Neither space accepts the 900 mm square, even before edge trimming and cutting loss.

This layout needs another sheet, revised dimensions or an agreed joint. Funtek’s drawing-based fabrication service therefore reviews finished pieces and direction, rather than quoting the order from square metres alone. A larger unrectified sheet can improve yield, but its outer allowance is not guaranteed finished width.

2. “Full body” and “bookmatch” answer different questions

Full-body selection concerns what is visible at an edge, groove or opening. Funtek’s full-body collection describes coordinated colour and mineral character through the body. That is a reason to inspect a cut sample; it does not mean every printed vein continues through every slab. A mitred built-up edge also creates an apparent thickness, rather than changing the original sheet’s thickness.

Bookmatch concerns the relationship between faces. In Funtek’s face and bookmatch guide, random faces, directional faces, continuous patterns and A/B mirrored pairs are separate arrangements. Two slabs with the same design name, or one face rotated, do not automatically form a mirror pair. Approve the actual A/B face IDs, direction arrows, cut positions and seam on one elevation before cutting, then carry the same piece marks onto the packing list.

Full-size white and grey-veined slab shown in Funtek’s factory gallery
A full face shows where the major veins lie. This factory-gallery image illustrates face inspection; it does not establish an A/B pair.

3. A 12 mm worktop still needs a cutout and support plan

Funtek’s fabrication and installation manual recommends a 10 mm internal corner radius for countertop openings and lists 70 mm as the minimum cutout-to-edge clearance, with 100 mm preferred. These are Funtek’s planning recommendations; another manufacturer’s selected product must follow its own fabrication guidance.

A sharp internal corner concentrates stress. Moving a sink opening closer to the front edge also reduces the remaining strip of material. The basin template, corner radii, edge distances and cabinet support can therefore decide whether a proposed layout works, even when two brands offer the same nominal thickness. For a visible built-up edge, choose the joint and finish from the edge-profile guide before the pieces are released.

Bridge saw and patterned slab in Funtek’s published fabrication-area gallery
Funtek’s fabrication-area gallery: finished dimensions, openings and orientation belong in the approved cutting information.

4. Compare inspection and packing as well as the surface

Funtek’s quality and tolerance standard calls for geometry checks on a clean, rigid, level support. A slab leaning on a rack is not the reference condition for judging its flatness. Appearance inspection uses a 1.5 m viewing distance under 500–1000 lux neutral-white lighting; instrument, slab ID, batch and measurement positions are recorded separately.

For repeated bathrooms, Funtek’s hotel-bathroom planning guide separates typical, mirrored and accessible room variants. Piece numbers link the approved drawing to room types and crates. This prevents a visually similar left-hand vanity from being treated as the right-hand piece. A useful quotation identifies who supplies the slab, who fabricates it, which revision is approved and how each finished piece will be identified on arrival.

When you request samples: a face chip helps compare colour and finish; an edge sample helps compare body appearance; a full-face image or actual slab inspection helps place veins and seams. For a fabricated order, add the finished-piece drawing. These answer different questions and make a brand comparison more useful.

Turn your shortlist into a slab and cutting plan

Send Funtek the design direction, full slab or finished-piece dimensions, quantity and delivery destination. We can discuss suitable Funtek slab options, face and edge samples, fabrication scope and a quotation.

LuCharlotte
LuCharlotte

Sintered Stone Specialist & Technical Advisor

About the author

LuCharlotte is a Sintered Stone Specialist & Technical Advisor at Funtek. She writes practical guidance for distributors, fabricators, architects, and project buyers on slab formats, surface finishes, fabrication requirements, applications, and order preparation. Her articles focus on the specifications and checks buyers should verify before selecting or ordering sintered stone.

Explore Collections
1 / 4

Questions about comparing sintered stone brands

01

Is this a ranking of the best sintered stone manufacturers?

No. It is an alphabetical reference covering 56 brands and product programmes. It separates material families and gives representative product details so you can build a shortlist. The better choice depends on the selected surface, component geometry, finish, fabrication system and available local supply, rather than its position in this list.

02

How can I compare quotations from different brands fairly?

Use the same finished-piece drawings, selected colour and finish, slab thickness and supply scope. Separate full slabs, fabrication, cutouts, edges, packing, transport and installation. Include the cutting layout: an apparently lower price per square metre can require more sheets or more complex fabrication for the same finished project.

03

Why does a brand offer a colour in one thickness but not another?

Formats, finishes and thicknesses are product configurations, not independent options available in every combination. A covering range may use a different sheet size from the worktop range; a special texture or body technology may exist only on certain products. Compare the exact product code and its format table, not just the colour name.

04

Can I assume slabs from the same group will match each other?

No. Brands within a group can use different collections, body colours, graphics and finishes. Even a matching design name does not establish batch compatibility or an A/B mirror pair. For adjoining surfaces, approve the selected references and actual face arrangement together; for replacement work, identify the original product code and batch if available.

05

What should I send Funtek after choosing a design direction?

Send the intended application, preferred colour and finish, full-slab or finished-piece dimensions, approximate quantity and delivery destination. For fabricated work, include the current drawing, basin or equipment templates, exposed edges and vein direction. Funtek can then discuss its own slab options, appropriate samples, cutting scope and supply quotation.