Full-slab supply
Surface selection, samples, format and thickness confirmation, and mixed-product order coordination.
FUNTEK / FACTORY
Sintered stone slabs.
Production and supply.
A 2,200-mu factory site. Three sintered stone production lines.
Full slabs, custom fabrication and export support for your business.
2,200 mu
Factory site area
≈ 1.47 million m²
3
Sintered stone production lines
Slab manufacturing
FACTORY OVERVIEW
What we can supply.
What we can do for you.
Funtek supplies full slabs and coordinates fabricated components for importers, distributors, fabricators, furniture manufacturers and project buyers. Our manufacturing base in Zhaoqing, Guangdong supports production and order preparation. The Shanghai team handles enquiries, samples, quotations and export follow-up.
You can source material by surface, format and thickness, submit drawings for fabrication review, and agree inspection and packing requirements. Our team coordinates these details with the order quantity and destination.
Custom fabrication
Drawing review, cut-to-size pieces, cutouts and edge finishing within the confirmed scope.
Export preparation
Order checks, protective packing, container planning and export document coordination.
SLAB SPECIFICATIONS
Sizes, thicknesses and surfaces.
The product catalogue lists the combinations below. Availability of each surface, size and thickness is confirmed for your order.
1200 × 2400 mm
9 mm
1200 × 2700 mm
9 / 12 mm
900 × 2700 mm
9 mm
1600 × 3200 mm
6 / 9 / 12 / 15 mm
800 × 2600 mm
15 mm
Surface series
Matt, polished, silk, micro-textured and digital mould series. Explore sintered stone surface finishes.
01 / SLAB FORMING
Full slabs to your specification.
Funtek operates 3 sintered stone production lines on a 2,200-mu factory site. The SACMI CONTINUA+ PCR 2000 system uses continuous compaction to form slabs for surface processing and sintering.
Tell us the surface, slab dimensions, thickness and quantity you need. We confirm stock supply or a production schedule for your order. For fabricators and furniture manufacturers, slab selection takes the finished-piece layout and application into account.
Format
Confirm the required slab dimensions and the finished-piece layout.
Thickness
Match the selected product to the fabrication and application requirements.
Order quantity
Record the slab quantity and production requirements in the purchase order.
02 / SURFACE PRODUCTION
Surface selection for your market.
Glazing and digital printing equipment support the production of patterned sintered stone surfaces. Buyers can review marble-look, stone-look, wood-look and solid-color options for their product range or project. The selected surface must be available in the required format and thickness.
We provide product selection and sample support before order confirmation. Review the finish on a sample and the pattern on a full-slab reference. For countertops, feature walls and furniture, we help check vein direction and piece positions against the drawing. The approved reference is recorded with the order.
Surface reference
Product code, finish and sample approval.
Pattern review
Full-slab layout, vein direction and visible variation.
Fabrication layout
Piece positions, seams and the orientation of the surface design.
03 / SINTERING
Production planning for your order.
The kiln facilities support slab sintering. See the sintered stone manufacturing process from material preparation to dispatch. Roller transport, firing equipment and access platforms form part of the production installation.
Estimated preparation time for stock orders is 7–14 days after confirmation, including dispatch arrangements. Standard orders requiring production have an estimated time of 25–30 days to reach ready-to-ship status. These periods cover order preparation; transit time depends on the shipment.
Timing for special surfaces, custom fabrication and phased deliveries is confirmed against the order requirements. Before order placement, we confirm specifications, quantities, packing requirements and the estimated ready-to-ship date.
04 / AUTOMATION & HANDLING
Handling equipment for large-format slabs.
The workshop uses robotic arms, suction lifting equipment and roller conveyors to transfer slabs between operations. Equipment stations have control cabinets and operator panels. These facilities support the handling requirements of full-size slabs during production.
For your order, slab dimensions and thickness are confirmed with the material specification. Packing and handling requirements are reviewed for the supplied format. This review includes the equipment and space required at the receiving location.
Transfer equipment
Robotic arms and suction heads for slab movement.
Roller conveyors
Material support and transfer between equipment stations.
Operator controls
Control cabinets and touchscreen interfaces at equipment stations.
05 / CUTTING & FABRICATION
Cut-to-size components for your application.
Funtek coordinates full-slab supply and fabrication to customer drawings. Work available for assessment includes cut-to-size pieces, sink and equipment cutouts, edge trimming, chamfers, and 45° mitre cuts and jointing solutions.
Before fabrication, we confirm finished dimensions, slab thickness, cutout positions, edge profiles, pattern direction and delivery form. Complex shapes, special cutouts and jointed components require drawing review to confirm feasibility, pricing and lead time. Review countertop edge profiles when preparing your drawing.
The quotation identifies the fabricator, fabrication location and delivery scope. It specifies whether the order covers full slabs, prefabricated components or bonded assemblies, and whether site installation is included.
Drawing information
Finished dimensions, thickness, cutouts and edge profiles.
Piece schedule
Quantity, part references and pattern orientation for each piece.
Packing requirements
Protection for edges and cutouts, with labels for the piece schedule.
06 / SAMPLE & ORDER CHECKS
Inspection requirements agreed with you.
Order checks cover the approved surface reference, dimensions, thickness, quantity and packing requirements. Request the product documents needed for your application during quotation.
ISO 10545-2 describes methods for measuring dimensions and surface quality, including length, width, thickness, straightness of sides, rectangularity and flatness. ISO 10545-3 covers water absorption, apparent porosity and density measurements. ISO 10545-4 covers modulus of rupture and breaking strength.
ISO 9001 is a standard for an organization’s quality management system. The certificates and test report library provides documents for review. The standards listed here identify the scope of document review; product test results and certification status are established by the applicable reports and certificates.
Surface condition
Color, pattern, finish and visible surface defects.
Dimensional checks
Slab or finished-piece dimensions and thickness against the specification.
Order verification
Quantity, product references, labels and agreed batch requirements.
07 / SLAB STORAGE
Stock coordination for slab supply.
The warehouse contains slab racks, identified storage sections and overhead lifting equipment. These areas support product selection, material handling and order preparation for full-slab supply.
Mixed-surface orders are assessed against stock availability, slab specifications and packing conditions. Combinations of thicknesses or sizes require confirmation of separate rack packing and container arrangements.
08 / EXPORT PACKING
Packing specified for your shipment.
Funtek coordinates export packing for full slabs and fabricated pieces. Frame or crate requirements are selected for the material dimensions, quantity and handling plan. The warehouse provides space for packed goods and dispatch preparation.
We confirm protective materials and shipping marks before dispatch. Fabricated pieces require packing that accounts for edges, cutouts and part identification. Packing information supports your receiving team with quantity checks and unloading preparation.
Packing method
Frame or crate selection for the material and handling plan.
Identification
Product references, quantities and shipping marks.
Receipt planning
Packing dimensions and handling requirements for the receiving team.
09 / LOADING & DISPATCH
Container loading and export coordination.
Overhead lifting equipment and forklifts support warehouse transport and container loading. Slabs and crates are handled according to their dimensions and packing configuration. The dispatch team prepares the goods for the agreed shipment. Use the 20GP slab loading guide to review reference quantities, packing and weight.
We coordinate container planning, packing lists, shipping marks and required export documents. Send the destination and delivery terms with your enquiry. The loading plan takes the packed dimensions and shipment weight into account; the receiving team confirms its unloading arrangements. Review shipping and delivery arrangements for transport planning.
FACTORY COMMUNICATION
Discuss the material.
Visit the production facilities.
Discuss your slab selection and fabrication requirements with the Funtek team. Product review covers the surface reference, dimensions, finishing details, inspection points and delivery requirements.
Contact us to arrange a factory visit or sample review. Include your product interests, application and purchasing requirements. The team will confirm the visit arrangements and the areas relevant to your order.
PURCHASING & SAMPLES
Plan your order.
Send your product list and quantities for project purchases, trial orders and mixed-surface orders. The quotation confirms the supply arrangement and minimum quantity per surface and specification.
300 m² minimum order
The minimum quantity for standard orders is 300 m². Project and trial order requirements are reviewed against the product list.
Mixed-surface loading
Combinations depend on stock, slab specifications and packing conditions. Sizes and thicknesses are reviewed for rack packing and container loading.
Samples
Standard small physical samples are free; the buyer pays international courier charges. Charges and preparation time for large, fabricated or custom samples are confirmed for each request.
ORDER REQUIREMENTS
Information for
your quotation.
The quotation is based on the selected product, quantity and delivery requirements. Send the information relevant to your order. Our team confirms product availability, fabrication scope, packing and schedule.
Slab distributors
Surface references, slab sizes, thicknesses, quantities and destination. Include mixed-product and packing requirements.
Stone fabricators
Slab references, thicknesses and quantities. Include the application, cutting plan and requirements for vein direction.
Furniture manufacturers
Finished-piece drawings, quantities, thicknesses, cutouts, edge details and packaging requirements.
Project buyers
Material schedule, application, surface finish, quantities, drawings and delivery location. Include inspection and document requirements.
CONTACT FUNTEK
Discuss your slab order.
Send your product requirements, quantity and destination.
Request a quotation, samples or a factory visit.