Funtek · Full-body collection
Built Through the Body. Designed for Every Edge.
Coordinated color and mineral character continue through the slab body, creating more natural-looking exposed edges, grooves, cutouts and architectural details.
Why full-body slabs are specified for visible edges and cut details.
Material proof
Check the Cut Edge Before Fabrication
Compare the slab face with the material revealed at the edge, cutout and finished architectural detail.
Compare the slab face with the material revealed after cutting.
Inspect the details where the slab body becomes part of the finished design.
See where coordinated edges make the overall composition feel more complete.
Drag to compare the material revealed at the cut edge.
Decorative pattern mainly on the surface
Coordinated body color · Through-body mineral character
Cut Edge Comparison selected
Full body does not always mean that every surface vein is reproduced identically through the entire thickness. The exact through-body effect varies by design. Always review the cut edge or physical sample before fabrication.
Full-body collection
Open each product to compare the full-slab pattern, available format and suitability for exposed edges, cutouts and grooves.
View design
Full body · 12 mm
View design
Full body · 12 mm
View design
Full body · 12 mm
View design
Full body · 12 mm
View design
Full body · 12 mm
View design
Full body · 12 mm
View design
Full body · 12 mm
View design
Full body · 12 mm
View design
Full body · 12 mm
View design
Full body · 12 mm
View design
Full body · 12 mm
View design
Full body · 12 mm
Fabrication proof
Follow the material from an uncut slab to the edges, openings and surfaces that remain visible after fabrication.
Real samples are handled and turned in natural light so color, movement and finish can be reviewed before fabrication.
Directly exposed profiles benefit most from coordinated body color and mineral character. Confirm tooling, support and a physical sample with the fabricator.
Full-body construction improves visual continuity, but it does not replace correct structural support, cutting tools, edge design or installation planning.
Application guidance
Choose full-body construction when the project reveals the slab beyond its top surface. Match the material to the edge, opening and joinery that the finished design will expose.
Best suited to direct polished edges, waterfall ends, undermount sink cutouts, drainer grooves and visible side returns.
A strong choice for stair treads, tabletops, open shelves, reception desks and custom components with exposed profiles.
Share the application, dimensions, edge profile, quantity and destination. We will confirm suitable samples, fabrication requirements and project supply options.
Use selectively where corners, niches, routed reveals, door openings or custom panel returns leave the slab body visible.
Specifications & files
Use this section to confirm available slab sizes, 12 mm thickness, finishes, pattern faces, bookmatch availability and the technical files required before fabrication.
Collection specification
Technical file index
PDF · 6 pages · Technical reference Full-Body Customer Technical Guide Definitions, slab formats, edge planning, sample approval, quality checks and ordering information.Samples, batches & quality
Review the slab face, cut edge and fabricated detail before production. For project orders, request batch labels, shade checks, measurements, packing photos and loading records before shipment.
Confirm the exact face, movement and direction selected for the project.
Review body color and mineral character before fabrication.
Check how the selected design resolves after cutting and polishing.
The approved batch is reviewed for visual consistency before packing.
Project records can include thickness, edge and flatness checks.
Edge protection, bracing and straps are documented before loading.
Project procurement
Send the design, application, dimensions, quantity and destination. We will confirm samples, project MOQ, production lead time, batch verification, export packing, shipping route and the documents available for your order.
Before you specify
Full-body construction means the slab’s internal material character is coordinated with its surface rather than relying only on a decorative top layer. This creates better visual continuity where the edge or interior is exposed. The exact vein alignment and appearance can vary by design, so review the chosen slab and sample before fabrication.
These Funtek full-body designs are offered in 1600 × 3200 mm and 1200 × 2700 mm formats, both at 12 mm thickness. Confirm current stock, finish, quantity, and production timing when requesting a quotation.
It is most visible in details that reveal the slab body: exposed countertop edges, grooves, drainage channels, stair profiles, shelving, furniture elements, and other precision-cut components. Final edge design and structural suitability should be reviewed with the fabricator.
Review the full-slab images first, then share the wall, island, or panel dimensions and preferred visual direction. Slab quantity and sequencing should be confirmed against the selected design and current production batch before cutting or installation.
Send the product names, application, dimensions, finish, quantity, destination and any drawings or cutting layouts. Funtek will confirm the available sample types, current product availability, project MOQ, production lead time, packing method, freight route and quotation. These details are order-specific rather than fixed across every design and destination.
No. Full-body and body-coordinated designs improve visual continuity through coordinated body color and mineral character, but they do not guarantee that every printed surface vein is reproduced identically through the full thickness. The result varies by design, so review a cut edge or fabricated sample before cutting.
For project orders, the selected production batch can be reviewed through slab-face photos, labels, shade checks and sequence confirmation before packing. State any bookmatch, directional or adjacent-panel requirement at quotation stage so it can be checked against the available batch.
The available file set may include the collection guide, product technical data, edge and fabrication references, product-specific test reports, packing photos, inspection records and shipping documents. Availability depends on the selected design and order, so request the exact file list with your quotation.
Project support
Send your selected designs, application, dimensions, quantity and destination. Funtek will confirm sample options, cut-edge appearance, technical documents, MOQ, lead time, export packing and delivered project pricing.
