How to Order Custom Shower Trays in Bulk

Plan a bulk shower tray order from the first quote and sample approval to production, inspection and delivery. See how a 24-tray example connects configurations to cartons.

LuCharlotte LuCharlotte 8 دقيقة قراءة تم التحديث

To order custom shower trays in bulk, send a schedule with the finished size, colour, drain layout and quantity for each configuration. Get a written quote that covers minimum quantities, fabrication, fittings, packing and delivery. Approve the sample and drawings, agree the payment and production milestones, then check the inspection record and packing list before shipping.

The 24-tray FTK-MX-01 example shows how to keep the same line references on the drawings, quote and carton list so each tray can be checked when it arrives.

Group the order by tray configuration

Start with your room schedule. Give repeated bathrooms one order line when they use the same tray drawing, finish and drain layout. Give a mirrored layout or a different notch, outlet position or finish its own line. If you only have a rough sketch, send it with the quantities you know and mark the dimensions still to be checked.

FTK-MX-01 is a worked mixed-size example for a single delivery batch to the Netherlands. The plan groups 24 trays across two finished sizes and three configurations. A01 and A03 are both 1,200 × 800 mm, but have different finishes and drains. A01 and A02 use the same colour and drain type, with a different finished length.

Swipe sideways on a phone to see all columns. Tap a product image to enlarge it.

Line Finished size Colour and drain Qty
A01 1,200 × 800 mm White Vein shower tray with a square point drainWhite Vein
Point drain
8
A02 1,000 × 800 mm White Vein
Point drain
8
A03 1,200 × 800 mm Grey Breccia shower tray with a short-end linear grilleGrey Breccia
Linear grille drain
8

Ask the supplier to confirm the proposed mix and any minimum quantities for the whole order and for each line. If a single room needs a different outlet, flag it early so the supplier can quote that configuration separately. Browse the sintered stone shower tray collection to identify finishes and drain layouts to put on your schedule.

MOQ, Pricing and Lead Times for Bulk Orders

Funtek reviews the minimum quantity for the whole order and for each finished configuration. Ask for both figures in the quote. If one layout falls below its minimum, ask whether it can share a production batch or be priced separately. The eight trays per configuration in FTK-MX-01 describe that example.

Calculate a comparable price

For an area-based quote, convert each finished size to metres, multiply length by width, then multiply by the quantity on that line. The 16 trays at 1.2 × 0.8 m and eight trays at 1.0 × 0.8 m total 21.76 m². At the collection's reference price of US$195 per m², the illustrative tray subtotal is US$4,243.20. Use the supplier's rate and fabrication scope for each line when pricing your order.

For a per-tray quote, multiply the quoted unit price for each configuration by its quantity. Compare the total at the same handover point. Add any separately charged fabrication, fittings, packing and transport, along with import or delivery costs you are responsible for.

Check what the project quote covers

Compare quotes against the same drawing revision and quantities. On FTK-MX-01, the scope covers finished trays and the outline and drain opening or channel shown on the agreed drawing. The plan prices unusual shapes, special cut-outs and added fabrication separately.

The drain hardware is also separate in this example. Ask for the fittings to be listed by tray line or drain type, with the cover, waste body, trap and any connectors itemised where applicable. That lets the installer compare the components with the drawing before the openings are cut.

Square point drain cover with round perforations
A point-drain opening and its fitting should be listed together in the quote.
Short-end linear grille in a Grey Breccia tray
For a linear grille, check the grille, channel and outlet scope in the quote.

The example includes individual protection and one carton per tray. Reinforced crates or pallets are separate. Transport to the agreed handover point in China is included in the example scope, with international carriage and final delivery priced separately. Ask for the named handover point and who arranges each freight leg when comparing suppliers.

FTK-MX-01 order configuration and quotation scope sheet
FTK-MX-01 groups the trays by configuration and lists what the example quotation covers.

Confirm when the order will be ready

Funtek lists approximately 10 days for tray production on its shower tray collection, with transit time separate. For bulk and special-cut layouts, ask for the estimated ready-to-ship date and the event that starts production. Check whether sample approval, drawing revisions, material availability, phased quantities or special packing add time. Ask for a separate transit estimate against the delivery destination.

Match each line to an approved drawing

Put the order-line code and drawing revision on the plan before you approve fabrication. Check the finished length and width against the site opening, then mark the drain position from fixed tray edges. A point-drain drawing should identify the outlet centre. A linear-grille drawing should also show which edge the channel runs along.

Overhead view of a White Vein tray with a square point drain
Dimension a point drain from fixed edges to the outlet centre.
Overhead view of a Grey Breccia tray with a short-end grille
Show which edge carries the linear grille and where the channel sits along it.

Mark notches and the entry edge on the plan if the glass enclosure or wall changes the outline. For colours that have to match across bathrooms, use the same approved surface sample or finish reference on the affected lines.

White Vein surface with fine grey veining
Use the finish reference on every line that calls for White Vein.
Grey Breccia surface showing broken stone markings
Keep Grey Breccia on its own line even when the finished dimensions match a White Vein tray.
White tray with a notched outline and parallel inlaid strips
A notched tray needs its own outline drawing and order-line reference.

The custom shower tray technical guide covers the dimensions, recess and installation conditions to resolve on the drawing. Use the point versus linear drain comparison if the outlet position or space below the tray still determines the layout.

Sample Approval and Quality Control Before Production

A colour or surface sample helps you approve the shade, veining and finish in the project lighting. If fit or detailing drives the decision, request a finished sample or agree a first-piece inspection. Use it to check the edge profile, usable footprint, cut-out, drain cover and threshold. Ask which samples are available, what they cost and when they can arrive.

Before releasing the drawings, put the acceptable tolerances and inspection checks in writing. Check finished dimensions, drain coordinates, notches and edge condition against the approved drawing. Where water testing is required, agree the support, level, drain fitting and acceptance method for a drainage check on the finished tray.

If the project specifies wet-barefoot slip resistance, ask for the test method and evidence for the specified walking surface and finish. If compliance applies to the finished tray as a product, ask for the evidence applicable to that assembly.

From Purchase Order to Final Delivery

  1. Issue the purchase order. Tie each line to the final drawing revision and record quantities, finishes, included fittings, inspection criteria and packing. State the agreed delivery term and named place.
  2. Agree payment and production release. Check the pro forma invoice against the purchase order. Record the currency, deposit and balance amounts, due dates and the events that trigger each payment. Set the production start date and the date the goods should be ready for shipment.
  3. Review the finished goods. Ask for the pre-shipment inspection record, including the agreed measurement checks, tray quantities, finish and edge condition, plus photos identified by order line. Resolve any discrepancies before approving dispatch.
  4. Check the shipping documents. Match the commercial invoice and final packing list to the purchase order and approved shipping marks. Confirm the transport document, consignee details and any destination documents required for your shipment. See Funtek's shipping process for the order-to-delivery handoffs.

Trace each tray line to its cartons

The packing plan assigns C01–C08 to A01, C09–C16 to A02, and C17–C24 to A03. Each planned carton holds one tray. As a receiving check, follow C01 back to A01 on the schedule, then match its size, finish and drain to the room allocation. If you ask for several configurations to share a crate, have the warehouse confirm the protection, labels and gross weight for that crate.

Sealed flat carton with a visible C01 label
The carton marked C01 corresponds to line A01 on the packing plan.

The plan estimates 24 cartons and 880 kg gross for the trays and their cartons. It uses 1,280 × 880 × 110 mm cartons at 38 kg each for 16 trays, and 1,080 × 880 × 110 mm cartons at 34 kg each for eight trays. The estimate is (16 × 38 kg) + (8 × 34 kg) = 880 kg. Drain fittings are allowed for separately.

FTK-MX-01 planned carton schedule showing carton ranges and estimated gross weights
The FTK-MX-01 schedule shows estimated weights and planned carton numbers.

Before booking freight, use the final packing list. Check the number of cartons or crates, pieces per carton, outside dimensions and measured gross weight after sealing. If cartons are palletised, give the freight provider the dimensions and measured gross weight of the loaded pallets, along with any separate accessory cartons.

Inspect the delivery and record any damage

Count the cartons and compare their labels with the final packing list. Photograph visible packaging damage and note it on the delivery record where possible. Open and check affected cartons as soon as it is safe to do so. For a damaged tray, keep the packaging and record the order line, carton number, quantity and photos of the damage. Notify Funtek and the carrier using the contact and reporting deadline agreed for the shipment so the team can review the replacement or claim.

Request a Bulk Shower Tray Quote

Send your tray sizes, quantities, drain layouts and destination. Our team will review your custom configurations, drawing requirements, packing options and quotation.

Bulk Shower Tray Order Questions

01

Can I send an enquiry before the room count is final?

Yes. Give the current count for each tray configuration and flag any provisional rooms. Ask for a quotation on that basis, then reconcile the final quantities before releasing the drawings for production.

02

How do I quote trays for separate installation phases?

Add a delivery phase to each line, even when the tray drawing is shared. Ask the supplier to show which cartons belong to each phase and quote any separate packing or delivery charges.

03

Can spare trays be included in the same order?

List spares as a separate quantity against the same approved configuration and label their cartons as spares. That keeps them out of the room allocation while documenting the drawing and finish for replacements.

04

What if the installer is supplying the drain fittings?

List the exact fitting and outlet direction in the drawing brief. Ask the tray supplier to confirm the opening or channel against that fitting and record on the quote which party supplies the hardware.

05

Should the freight estimate include a pallet or crate?

If the shipment is palletised or crated, ask for the outer dimensions and gross weight of the final handling units, including that packaging. Give those figures and the separately packed accessories to the freight provider.